Chilliwack · Fraser Valley · Lower Mainland
Floors that people Remember.
Premium Epoxy & Polyaspartic Flooring in Chilliwack, BC
Epoxy Flooring Installation in Chilliwack, BC
Your floor is the first thing they Feel.
We install epoxy and polyaspartic floor coatings for residential, commercial and industrial spaces across Chilliwack, the Fraser Valley and the Lower Mainland. Every project begins with mechanical diamond grinding, because adhesion is decided long before the first coat is poured.
Mechanical diamond grinding
Surface preparation · Step 01
Featured Systems
Choose your floor system
Build-up · top to bottom
- Clear gloss polyaspartic
- Metallic pigment body coat
- Penetrating primer
- Diamond-ground concrete
Pigment is moved by hand while the resin is still live, so every pour carries its own current of depth and reflection. No two floors resolve the same way.
Showrooms · Salons · Retail · Feature interiors
View MetallicMetallic system layers
How the metallic build works.
Read this metallic flooring build from the finished surface down to the prepared concrete.
- 01
Clear gloss finish
Clear polyaspartic finish layer
Forms the clear finished surface over the metallic body coat.
Why it matters: It keeps the visual movement below as the visible design layer rather than the wear surface.
- 02
Metallic pigment body coat
Pigmented resin body coat
Creates the depth and hand-worked movement associated with a metallic finish.
Why it matters: This is the layer that establishes the floor’s individual visual character.
- 03
Penetrating primer
Concrete primer
Supports the transition from prepared concrete into the resin build.
Why it matters: A sound bond below the visual layers helps the complete system work as one assembly.
- 04
Prepared concrete
Mechanically prepared concrete substrate
Provides the clean, profiled slab the coating system is built over.
Why it matters: The finish above can only follow the condition and preparation of the concrete beneath it.
Transformation Showcase
Drag to see the difference
Residential Garage
Decorative Flake system · Chilliwack, BC
Drag the handle, or use arrow keys, to compare
Our Installation Process
The Drip Standard
Four stages, in order, on every project. Nothing optional.
01
Surface Preparation
We mechanically diamond grind the concrete to remove contaminants and open the surface profile. This is the step that decides whether a floor lasts, and it is never substituted with an acid wash or a chemical etch.
02
Concrete Repairs
Cracks, joints, spalls and surface imperfections are repaired before any coating is installed. Defects left in the slab telegraph through the finish, so they are resolved first.
03
Coating Installation
Industrial-grade epoxy and polyaspartic systems are applied to specification — correct primer, correct build thickness, correct recoat window, monitored throughout.
04
Final Inspection
Every floor is inspected for consistent coverage, cure and finish before handover, along with the care guidance that keeps it performing.
Service Areas
On site across the Fraser Valley
Based in Chilliwack, BC. We install throughout the Fraser Valley and Lower Mainland, and travel for larger projects.
Chilliwack
- Hope
- Harrison Hot Springs
- Agassiz
- Mission
- Abbotsford
- Cultus Lake
Fraser Valley
- Aldergrove
- Langley
- Surrey
- Maple Ridge
- Pitt Meadows
- New Westminster
Lower Mainland
- Burnaby
- Coquitlam
- Port Coquitlam
- Port Moody
- Richmond
- Vancouver
- North Vancouver
- West Vancouver
Travel Service
- Delta
- Ladner
- Tsawwassen
- Larger Projects
- Industrial Facilities
Request a free quote
Tell us about your floor
