Finished garages
For a visual surface that still needs to work around vehicles, storage and cleanup.
Broadcast finish system · Port Moody, BC
Decorative flake flooring gives a Port Moody concrete floor tonal variation through a layered broadcast system. The visible blend is only one part of the finished surface.
Concrete condition, preparation, base layers, topcoat selection and daily use all influence the complete system.

Flake flooring
A Flake floor starts with the concrete and the working conditions around it. The finish direction, preparation and system build are scoped together rather than selected from a generic material label.
How a flake system is built

Build-up · top to bottom
Vinyl flake is broadcast to refusal, then ground back and sealed under a UV-stable polyaspartic topcoat. Texture underfoot, traction when wet, and a surface that hides everyday use.
Residential garages · Workshops · Commercial floors
View Decorative FlakeDecorative Flake system layers
Read this decorative flake flooring build from the finished surface down to the prepared concrete.
UV-stable polyaspartic topcoat
Seals the represented flake broadcast beneath the final exposed surface.
Why it matters: It completes the build above the decorative flake layer.
Vinyl flake broadcast
Creates the blend, texture and visual variation associated with a flake floor.
Why it matters: The broadcast provides the system’s selected decorative character rather than a flat colour field.
Pigmented epoxy resin base layer
Provides the resin stage into which the vinyl flake is broadcast.
Why it matters: It connects the decorative broadcast to the prepared concrete below.
Mechanically prepared concrete substrate
Provides the prepared slab under the flake system.
Why it matters: The bond of the full build begins with the prepared concrete surface.
Where it fits
A broadcast flake floor can create a calm, practical visual finish while preparation and use keep the system honest.
For a visual surface that still needs to work around vehicles, storage and cleanup.
For practical rooms where a detailed floor finish supports an active setting.
For commercial or residential rooms where visual variation is preferred over a flat surface.
The broadcast material creates the visible finish, while the condition of the concrete and the layers beneath it set the foundation.
A sample can guide colour direction, but it does not replace a site-specific preparation and use conversation.
A finished garage, lower-level room or flex space can carry wet gear, vehicles, storage and changing light, so the final surface should follow the actual use of the room.
Cleaning, traffic and desired texture all matter when a flake finish is being compared with the other decorative directions.
Lighting, surrounding walls and the room’s existing materials influence how the blend reads once installed.
A project review helps keep the visual direction connected to real conditions rather than an isolated sample photo.
Project record
Verified project photographs, client feedback and case studies can be added here when supplied. This page does not prefill proof that has not been documented.
Project gallery
Reserved for verified future material.
Case study
Reserved for verified future material.
Client feedback
Reserved for verified future material.
Common questions
Something not covered here? Ask before the quote so the scope can be discussed clearly.
604-991-8069Request a free quote
Explore next
Return to the Port Moody system overview.
Compare the four decorative finish directions.
Understand the slab review before coating selection.
Start with photos, room use and practical access details.
Compare broadcast-system paths through room use, preparation and finish direction.
Understand how slab review, repairs and mechanical preparation inform the final floor-system scope.